Full front view of an empty hanging propagation station with a botanical resin panel, white “LET’S GROW” lettering, sage green macramé, two upper plant cups, and two removable clear round vases.
Hanging propagation station displayed with two small air plants above and pothos cuttings rooting in the two lower clear vases, showing the complete handmade piece in use.
Full front view of the actual propagation station without plants, showing the wooden hanging ring, pressed botanical resin panel, four empty vessels, sage macramé, and silver hardware.
Close front view of the clear rounded resin panel with embedded pressed greenery, raised white “LET’S GROW” letters, and two empty transparent air plant holders.
Close view of the two lower round propagation vases hanging from sage green knotted macramé, with silver lobster clasps and attachment rings visible.
Close-up of the pale wooden hanging ring and sage green macramé loop used to suspend the botanical propagation station from a wall hook.
Side profile of an upper clear plant holder mounted to the botanical resin panel, showing the holder’s depth and how far it projects from the wall.
Angled close-up of the resin panel’s lower edge, silver ball-chain connections, and sage macramé hangers that support the removable propagation vases.
Detailed angled view of the raised white lettering, real pressed foliage inside the clear resin, layered panel edges, and one lower ball-chain attachment point.
Full empty propagation station beside a measuring tape, showing an overall hanging length of approximately 20 inches from the wooden ring to the bottoms of the lower vases.
Front measurement view of the botanical resin panel and hanging vessels, showing the panel at approximately four inches tall and the lower section extending beneath it.
Close measurement view of the detachable lower section, showing each macramé hanger and round propagation vase extending approximately ten inches below the resin panel.
Full front view of an empty hanging propagation station with a botanical resin panel, white “LET’S GROW” lettering, sage green macramé, two upper plant cups, and two removable clear round vases.
Hanging propagation station displayed with two small air plants above and pothos cuttings rooting in the two lower clear vases, showing the complete handmade piece in use.
Full front view of the actual propagation station without plants, showing the wooden hanging ring, pressed botanical resin panel, four empty vessels, sage macramé, and silver hardware.
Close front view of the clear rounded resin panel with embedded pressed greenery, raised white “LET’S GROW” letters, and two empty transparent air plant holders.
Close view of the two lower round propagation vases hanging from sage green knotted macramé, with silver lobster clasps and attachment rings visible.
Close-up of the pale wooden hanging ring and sage green macramé loop used to suspend the botanical propagation station from a wall hook.
Side profile of an upper clear plant holder mounted to the botanical resin panel, showing the holder’s depth and how far it projects from the wall.
Angled close-up of the resin panel’s lower edge, silver ball-chain connections, and sage macramé hangers that support the removable propagation vases.
Detailed angled view of the raised white lettering, real pressed foliage inside the clear resin, layered panel edges, and one lower ball-chain attachment point.
Full empty propagation station beside a measuring tape, showing an overall hanging length of approximately 20 inches from the wooden ring to the bottoms of the lower vases.
Front measurement view of the botanical resin panel and hanging vessels, showing the panel at approximately four inches tall and the lower section extending beneath it.
Close measurement view of the detachable lower section, showing each macramé hanger and round propagation vase extending approximately ten inches below the resin panel.

Let's Grow Hanging Propagation Station

$85.95

One plant cutting becomes two, then five, and suddenly every available glass in the house has something growing roots in it.

Let’s Grow gives those ambitious little plant babies a home of their own. This one-of-a-kind hanging propagation station combines a clear resin panel filled with real pressed greenery, sage green macramé, two air plant holders, and two removable propagation vases.

The lower vases attach with lobster clasps, so they can be unclipped, rinsed, refilled, and hooked back into place without taking the entire station off the wall. Because changing propagation water does not need to become a whole damn project.

The raised white lettering adds a playful touch without competing with the preserved botanicals inside the resin. Empty, it is a piece of botanical wall art. Add air plants and a couple of pothos or philodendron cuttings, and it becomes a tiny vertical garden that changes as everything grows.

This is the only propagation station made in this exact combination. Once it finds its wall, there will not be another identical one waiting behind it.

Details

- Clear resin panel with real pressed greenery

- Raised “LET’S GROW” lettering

- Two upper air plant holders

- Two removable plastic propagation vases

- Hand-knotted sage green macramé

- Silver-toned chains, rings, and lobster clasps

- Natural wooden hanging ring

- Made for indoor display

- Plants and cuttings are not included

Each Infinity Drift & Bloom piece is made by hand. Tiny bubbles, subtle variations, and other small signs of the process may be present—not factory flaws, just evidence that an actual person made it.

One plant cutting becomes two, then five, and suddenly every available glass in the house has something growing roots in it.

Let’s Grow gives those ambitious little plant babies a home of their own. This one-of-a-kind hanging propagation station combines a clear resin panel filled with real pressed greenery, sage green macramé, two air plant holders, and two removable propagation vases.

The lower vases attach with lobster clasps, so they can be unclipped, rinsed, refilled, and hooked back into place without taking the entire station off the wall. Because changing propagation water does not need to become a whole damn project.

The raised white lettering adds a playful touch without competing with the preserved botanicals inside the resin. Empty, it is a piece of botanical wall art. Add air plants and a couple of pothos or philodendron cuttings, and it becomes a tiny vertical garden that changes as everything grows.

This is the only propagation station made in this exact combination. Once it finds its wall, there will not be another identical one waiting behind it.

Details

- Clear resin panel with real pressed greenery

- Raised “LET’S GROW” lettering

- Two upper air plant holders

- Two removable plastic propagation vases

- Hand-knotted sage green macramé

- Silver-toned chains, rings, and lobster clasps

- Natural wooden hanging ring

- Made for indoor display

- Plants and cuttings are not included

Each Infinity Drift & Bloom piece is made by hand. Tiny bubbles, subtle variations, and other small signs of the process may be present—not factory flaws, just evidence that an actual person made it.